Role overview
What you'll be stepping into
Uganda Electricity Generation Company Limited (UEGCL) is a Private Limited Liability Company incorporated in March 2001 under the Companies Act (Cap 106) of the Laws of Uganda and in conformity with the Electricity Act (Cap 157).
UEGCL commenced operations on 1 April 2001 and is wholly owned by the Government of the Republic of Uganda. Its Head Office is located in Kampala.
The Company's mandate is to establish, acquire, maintain, and operate electricity generation facilities, promote research and development in the electricity generation sector, and operate on sound business principles.
Job Purpose
The Senior Protection Engineer will provide company-wide technical leadership, specialist support, and engineering assurance in electrical protection systems across UEGCL's power generation plants.
The role covers generator protection, excitation and protection coordination, plant-grid interface protection, and associated protection control systems.
Key Duties and Responsibilities
1. Protection Standards, Policies and Procedures
Develop, review, and maintain UEGCL's protection philosophy, standards, procedures, and technical requirements.
Ensure protection practices are benchmarked against applicable Grid Code requirements, OEM recommendations, relevant IEC, IEEE, and CIGRE standards, and industry best practices.
2. Protection Schemes and Relay Settings
Calculate, review, and submit protection schemes across all UEGCL power plants to the Manager, Asset Management, for approval.
Ensure approved protection settings remain current, accurate, version-controlled, and properly implemented across all UEGCL power plants.
3. Generator Protection and Excitation Systems
Review and provide technical assurance on coordination between generator protection systems and excitation/AVR control functions.
Assess coordination with under- and over-excitation limiters, generator capability curves, and applicable operating limits.
Ensure generating units remain adequately protected under normal and abnormal grid conditions.
4. Protection Coordination and Power-System Studies
Coordinate and/or oversee protection coordination, discrimination, and relevant power-system studies for UEGCL plants and grid connections.
Ensure appropriate coordination, discrimination, and selectivity of primary and backup protection systems.
5. Protection Testing and Maintenance
Develop and provide guidance on protection testing and maintenance requirements.
Establish appropriate periodic testing intervals and test methodologies.
Lead protection testing, commissioning, troubleshooting, and periodic assessment of protection systems.
Work with numerical protection relays/IEDs, associated trip logic, communication interfaces, and protection-related control functions.
6. Protection Performance and Fault Analysis
Review protection performance, test results, relay records, fault reports, disturbance and oscillography data, Sequence of Events (SOE), SCADA trends, and relevant System Operator/network disturbance data.
Recommend appropriate corrective actions based on technical findings.
7. Protection and Control System Integration
Coordinate with C&I and SCADA teams to ensure correct integration of protection IEDs with plant control and monitoring systems.
Ensure appropriate integration of alarms, trips, event records, time synchronisation, communication links, and disturbance-data retrieval.
8. Project and Engineering Support
Provide specialist protection engineering input and technical oversight during the design, procurement, installation, commissioning, modification, rehabilitation, and maintenance of UEGCL power plants.
9. Protection Settings and Configuration Management
Establish and maintain a controlled protection-settings and configuration-management system/database covering:
Approved setting files
Protection calculations
Relay configurations
Drawings
Change justifications
Version control
Approvals
Testing and commissioning records
Rollback arrangements
Other relevant protection records
10. Protection Equipment Condition and Reliability
Provide technical guidance on the assessment of the condition, reliability, and performance of protection equipment.
Assess numerical relays, CTs, VTs, trip circuits, DC systems, and associated protection interfaces.
Recommend appropriate interventions based on equipment condition and operational requirements.
11. Plant-Grid Protection Coordination
Coordinate with UETCL/System Operator and other stakeholders on plant-grid protection interfaces.
Support protection coordination, operating limits, and assessment of changes in grid configuration or fault levels that may affect UEGCL generating assets.
12. Protection Incident Investigation
Investigate protection trips, maloperations, abnormal events, and failures.
Lead or provide specialist technical input to root-cause analyses.
Define, track, and verify corrective and preventive actions.
13. Technical Specifications and Tender Evaluation
Review protection aspects of technical specifications.
Participate in the technical evaluation of tender documents.
Review contractor submissions, design drawings, acceptance testing, and commissioning procedures for protection equipment and services.
14. Lifecycle and Obsolescence Management
Develop and maintain lifecycle plans for critical protection systems.
Consider asset condition, technology obsolescence, availability of spares, cybersecurity, OEM support, and operational risks.
Address digital protection-system obsolescence, communication architecture, cybersecurity, OEM support, and operational risk.
15. Protection System Health and Risk Reporting
Prepare periodic company-wide protection-system health and risk reports.
Highlight protection-setting deficiencies, equipment condition, outstanding corrective actions, compliance gaps, and emerging risks for management attention.
16. Technical Guidance and Mentorship
Provide technical guidance and mentorship to engineers and technicians undertaking protection activities across UEGCL power plants.
17. Compliance and Safety
Ensure compliance with UEGCL procedures, applicable Grid Code requirements, electrical safety requirements, OEM recommendations, and relevant IEC, IEEE, and CIGRE standards and guidelines.
Minimum Qualifications
Applicants should possess:
An Upper Second-Class Bachelor's Degree in Electrical Engineering, Power Engineering, or a related field.
A Master's Degree in Electrical Power Systems Engineering or a related field is an added advantage.
Registration as an Engineer with the Engineers Registration Board (ERB) is mandatory.
Membership of the Uganda Institution of Professional Engineers (UIPE) or an equivalent professional body.
Required Experience
Candidates should have:
At least 6 years of relevant experience in power-system protection engineering within a power utility, OEM, or engineering consultancy environment.
Demonstrable experience in protection scheme calculations, relay settings and configuration, protection coordination, testing, and commissioning in a generating power plant.
Demonstrated experience in testing protection relays, current transformers, voltage instrument transformers, switchgear, surge arrestors, earthing systems, and energy meters.
Practical knowledge of protection testing tools and equipment, such as the Omicron protection test set.
Desirable Competencies and Skills
The successful candidate should demonstrate:
Strong knowledge of power-system protection and relay coordination.
Proficiency with numerical protection relays/IEDs, relay configuration software, and protection testing equipment.
Fault and disturbance analysis skills.
Knowledge of electrical safety and risk management.
Strong technical report writing and problem-solving abilities.
Leadership, mentoring, and stakeholder management skills.
Ability to specify replacement and spare parts.
Excellent analytical skills.
Sound knowledge of electrical safety measures.
Excellent troubleshooting and problem-solving abilities.
Ability to work under pressure and remain on call when required.
Strong leadership, communication, and team motivation skills.
Ability to work effectively within or lead a team.
Strong organisational skills, with a systematic and precise approach to work.
How to Apply
Interested and qualified applicants should address their applications to:
Chief Human Resource Officer
Uganda Electricity Generation Company Limited (UEGCL)
Block C, Victoria Office Park
Okot-Kiwanuka Close, Bukoto
P.O. Box 75831
Kampala, Uganda
Applicants should submit the following:
Application letter
Certified copies of academic documents
Certified copies of professional qualifications
Detailed Curriculum Vitae indicating two referees and their full addresses
Electronic Application
Applications must be submitted electronically as one PDF attachment only.
The email subject line should clearly indicate the name of the position applied for.
Email: jobs@uegcl.go.ug
How to apply

